·	Timbering:- ABS Plastic, Plywood, Thick or Thin - Copperclad Soldered Construction Pointwork can also be supplied.

·	Indication Price List is for Plastic/Plywood timbered pointwork, Soldered Copperclad Construction is available to order at a lower price.

·	Rail:- Flat Bottom or Bullhead - Steel or Nickel Silver.

·	For Bullhead Track, Chairs either C & L or Exactoscale.

·	DCC Friendly.

·	If plywood timbers are selected with plastic chairs, for an additional cost of £15.00 per turnout, the rail can be soldered to rivets on the slidechair timbers.

·	All rivet construction can be chosen for plywood timbering with cosmetic chairs but at an additional cost depending on the type of turnout specified.

·	The common crossing is soldered to pcb strips and the point blades are bonded to stock rails.

·	For Flat-bottom track various options are available.

·	Droppers fitted.

·	Stretcher bars are normally one of my own designs but if you want something else that is OK too. Currently there are  3 designs available, the original, original finescale and later finescale.

·	Switch anchor stays can also be fitted (where appropriate i.e. REA/GW type flexible switches) at extra cost, as can additional detailing.

·	Pointwork complexes and layouts can also be designed and/or produced.

·	In addition to REA/GW flexible switches - Older style curved and loose heel switch turnouts are also possible.

·	Plain track can also be supplied, please specify type of chair and panel length, Priced at the equivalent of £14.50 per half metre.

·	I recommend Templot, version 2 of which will shortly become free for non-commercial use. For more information Templot see www.Templot.com